Dear xuepeng;
The TDS3000autoArmPrt in the tds3000 necessaries seq-2.0.8. You can
downloaded it from the following.
http://www.slac.stanford.edu/comp/unix/package/epics/sequencer/
Thank you.
Best regards,
Kukhee Kim
March 8, 2005
-------------------------------
Kukhee Kim
Instrument & Control, KSTAR
Korea Basic Science Institute
52 Yeoeun-dong, Yusung-gu, Daejeon 305-333
Korea
Email: [email protected]
Tel: +82 42 870 1616 Fax: +82 42 870 1609 Cell: +82 17 513 4849
________________________________________
From: xuepeng [mailto:[email protected]]
Sent: Tuesday, March 08, 2005 8:54 PM
To: [email protected]
Subject: RE: about Tektronix TDS3000 series oscilloscopesdevice device
support
Dear Kukhee Kim:
I appreciate your help.
I had tried to install TDS3000 with asyn4-1. In tds3000/configure/RELEASE,
I marked the program line "SNCSEQ=$(SUPPORT)/modules/soft/seq/2-0-8-asd1"
because I thought SNCSEQ is optional. I will try to install TDS3000 with
asyn3-2 and keep SNCSEQ.
Can you tell me where I download the SNCSEQ?
Thanks!
xuepeng
- Navigate by Date:
- Prev:
RE: about Tektronix TDS3000 series oscilloscopesdevice device support Kim, Kukhee
- Next:
Re: Who is using what EPICS version Graham Waters
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: about Tektronix TDS3000 series oscilloscopesdevice device support Kim, Kukhee
- Next:
RE: about Tektronix TDS3000 series oscilloscopesdevice device support liushu
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|