Experimental Physics and
Industrial Control System

Eric Norum <[email protected]> · Thu, 24 Feb 2005 09:24:58 -0600

On Feb 24, 2005, at 1:32 AM, Kiman Ha wrote:
Hi all,
Those anyone knows where to get “rtems-4.7.tar.bz2”?
I checked below ftp sit but there is only previous snapshot versions.
ftp://www.rtems.com/pub/rtems/snapshots/rtems/current/
And anyone tried to run EPICS IOC under Arcturus uCDIMM ColdFire 5282
hardware platform.
Eric Norun mentioned at RTEMS EPICS tutorial the RTEMS-4.7 kernel is
bootable under uCDIMM module.
That means RTEMS-4.7 kernel has included uCDIMM bsp?

The uCDIMM 5282 support is not yet in any released version of RTEMS.

You will need to get RTEMS directly from the OAR CVS repository. Check
out a version from 2005-02-15.

You must have a fairly recent GNU toolset to build this. Here's what I
used in my 'getAndBuild' script:
GCC=gcc-3.4.3
BINUTILS=binutils-2.15
NEWLIB=newlib-1.12.0
BINUTILSDIFF=20040519
GCCDIFF=
NEWLIBDIFF=
The patches are available from the OAR SOURCES directory.
--
Eric Norum <[email protected]>
Advanced Photon Source
Argonne National Laboratory
(630) 252-4793

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System