I am attaching a R3_14 version of epvxi that builds and loads on vxWorks.
Please note
1) It only works on vxWorks. It should be converted to also work for
RTEMS. This means:
a) replacing all vxWorks specific calls with devLib calls
b) All shell commands need to be registered.
2) It has NOT been tested on a vxi IOC. I have no easy way to do this.
It is at least a good starting point.
The epvxi code was written by Jeff Hill.
Marty Kraimer
Laznovsky, Michael wrote:
Hi- has anyone out there by any chance ported this code to 3.14.X?
In particular:
epvxi.h
drvEpvxi.h
drvEpvxi.c
drvEpvxiMsg.c
thanks,
Mike
-----
Michael P. Laznovsky mailto:[email protected]
Application Software Developer, ESD ofc: (650) 926-2924
Stanford Linear Accelerator Center, MS-46 fax: (650) 926-3515
2575 Sand Hill Road, Menlo Park CA 94025 USA http://www.slac.stanford.edu
Attachment:
epvxi.tar.gz
Description: Unix tar archive
- References:
- base/src/drv/ansi -> R3.14? Laznovsky, Michael
- Navigate by Date:
- Prev:
asynDriver R4-2 Marty Kraimer
- Next:
base R3.14.7: errlog powerPC problem Marty Kraimer
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
base/src/drv/ansi -> R3.14? Laznovsky, Michael
- Next:
RE: edm (file generation) Baker, KA (Keith)
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
<2005>
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|