Experimental Physics and
Industrial Control System

Eric Norum <[email protected]> · Wed, 02 Feb 2005 09:05:08 -0600

Zoltan Kakucs wrote:

Hi,
I've downloaded the last 3.14.7 Release from the EPICS-Site and tried to
build it for solaris-sparc. (Solaris 8.0)

The build crashed with the following error:

My workaround for this error, in the
base/src/libCom/osi/os/default/epicsReadLine.c file:
-- delete this line --- #ifndef EPICS_COMMANDLINE_LIBRARY
#define EPICS_COMMANDLINE_LIBRARY EPICS_COMMANDLINE_LIBRARY_EPICS
-- delete this line --- #endif
OR
-- add this line outside of that define --- #define
EPICS_COMMANDLINE_LIBRARY EPICS_COMMANDLINE_LIBRARY_EPICS
Both represents the same ;-).
This is one solution for me for now, but please let me know, if there is
a more official one ?

Release 3.14.6 can be built without such an error.

An error on my part when committing the R3.14.7 changes resulted in
configure/os/CONFIG_SITE.Common.solaris-sparc containing the line:
COMMANDLINE_LIBRARY = READLINE
Just comment out or remove this line and rebuild.
--
Eric Norum                                 [email protected]
Advanced Photon Source                     Phone: (630) 252-4793
Argonne National Laboratory

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System