Experimental Physics and
Industrial Control System

john sinclair <[email protected]> · Mon, 20 Dec 2004 19:16:52 +0000

The problem is not with EPICS. The ethernetIP device support code explicitly 
sets LINR to 0 during init.

John Sinclair

On Monday 20 December 2004 5:57 pm, you wrote:
> For R3.14.6, ai record, the following:
>
>        field(LINR, "LINEAR")
>
> does not generate a database parse error, but after iocInit the LINR field
> is set to 0 and the behavior of the record seems to be independent of the
> value of ESLO.
>
> Poking a 2 into LINR seems to make the record aware of the ESLO field.
>
> Can anyone explain this. I've read the record manual but am still not
> certain of the correct value for the LINR field.

-- 
John Sinclair

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System