EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <20042005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <20042005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: RTEMS-mvme5500 BSP available
From: "Joel Sherrill <[email protected]>" <[email protected]>
To: "Feng, Shuchen" <[email protected]>
Cc: "'Till Straumann '" <[email protected]>, "''[email protected]' '" <[email protected]>, "''[email protected]' '" <[email protected]>
Date: Mon, 20 Sep 2004 17:02:41 -0500
Feng, Shuchen wrote:
Joel Sherrill wrote :


Kate... Is this an official submission at this point?


May I know what is the requirement of the official submission ?

Source code is the first and most obvious one.


The second is permission.  This involves you transmitting the
code to the RTEMS Project via email, ftp to incoming, etc..
The source code must have appropriate licensing and
redistribution requirements.  Given that you are submitting
a BSP, the license should be standard RTEMS -- GPL with
exception.

The third is practical.  I don't want to merge any code
before you think it is ready.

THis looks like a pre-submission test snapshot again


Yes, I was told it is OK to give the source code for people
to test before it is put in the source tree.

OK. Whenever you think it is ready.


The web site is for document reference, which will get updated later.
I wanted to post this message so that people know the
source code  for the  RTEMS-mvme5500 BSP  is
available  for evaluation upon request  to [email protected].

Then it isn't ready for submission yet. If it is "evaluation by request", then it isn't open enough to include in RTEMS yet.


Regards, Kate

-----Original Message-----
From: Joel Sherrill <[email protected]>
To: Till Straumann
Cc: Feng, Shuchen; '[email protected]'; '[email protected]'
Sent: 9/20/2004 5:42 PM
Subject: Re: RTEMS-mvme5500 BSP available

Till Straumann wrote:

Feng, Shuchen wrote:


Hello,


The source code for the RTEMS-mvme5500 BSP is available for evaluation upon request to [email protected] before it's in the RTEMS source tree.


Other related document can be found at



http://www.nsls.bnl.gov/organization/UserScience/Detectors/Software/Defa
ult.



I get an infamous Http/404 (page not found) error when trying to access this page :-(


The URL wrapped .. add "htm" after the "." at the end.

THis looks like a pre-submission test snapshot again. :(

Still waiting.. hoping... :)

--joel


-- T.


htm


Regards, Kate







--
Joel Sherrill, Ph.D.             Director of Research & Development
[email protected]                 On-Line Applications Research
Ask me about RTEMS: a free RTOS  Huntsville AL 35805
   Support Available             (256) 722-9985


References:
RE: RTEMS-mvme5500 BSP available Feng, Shuchen

Navigate by Date:
Prev: RE: RTEMS-mvme5500 BSP available Feng, Shuchen
Next: caget caput Michael O'Farrell
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <20042005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: RE: RTEMS-mvme5500 BSP available Feng, Shuchen
Next: RE: RTEMS-mvme5500 BSP available Feng, Shuchen
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <20042005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·