Experimental Physics and
Industrial Control System

Kristi Luchini <[email protected]> · Fri, 27 Aug 2004 16:47:30 +0200

Hi Mike,
I have another problem occuring when building the R3.14.6
sequencer/test/bad/misplacedExit.st

I've listed the make output below, but what I find online 26 of the
sequence misplaceExit.c is
when(delay(.1))

Is there something that I could have setup incorrectly such this
built-in sequence function no longer works or this a problem that only
shows

up in R3.14.6 when building on an hpux host?
creek: .../test/bad > gmake

gmake -C O.hpux-parisc -f ../Makefile TOP=../../.. T_A=hpux-parisc install

gmake[1]: Entering directory
`/tmp_mnt/net/csr/csr-home/luchini/work/epics/R3.14.6/support/seq/2-0/test/bad/O.hpux-parisc'

cc -c -DOSITHREAD_USE_DEFAULT_STACK -DHP_UX -Aa -O
+DAportable +z -D_HPUX_SOURCE -I. -I.. -I../../../include/os/hpux
-I../../../include
-I/home/guests/luchini/epics/R3.14.6/support/seq/2-0/include/os/hpux
-I/home/guests/luchini/epics/R3.14.6/support/seq/2-0/include
-I/home/guests/luchini/epics/R3.14.6/support/base/3-14-6-0/include/os/hpux
-I/home/guests/luchini/epics/R3.14.6/support/base/3-14-6-0/include
misplacedExit.c

cc: "misplacedExit.c", line 1: warning 501: Empty source file.

aCC -o misplacedExit -AA -mt
-Wl,+b/home/guests/luchini/epics/R3.14.6/support/base/3-14-6-0/lib/hpux-parisc:/home/guests/luchini/epics/R3.14.6/support/seq/2-0/lib/hpux-parisc:/net/csr/csr-home/luchini/work/epics/R3.14.6/support/seq/2-0/lib/hpux-parisc,+s
misplacedExit.o
/usr/ccs/bin/ld: Unsatisfied symbols:

main (Not referenced yet! Probably due to -u option)

gmake[1]: *** [misplacedExit] Error 1

gmake[1]: Leaving directory
`/tmp_mnt/net/csr/csr-home/luchini/work/epics/R3.14.6/support/seq/2-0/test/bad/O.hpux-parisc'

gmake: *** [install.hpux-parisc] Error 2

- Regards,
    Kristi

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System