Experimental Physics and
Industrial Control System

[email protected] wrote:

> Hello Kate,
>
> Mr OH was successfully compile and loding epics base3.14.6 and asyn3.2 application based your binary BSP and utility.
> It is very nice toolset for starting for easily compile and testing applications.
> Did you tested Marty's asyn3.2  code with RTEMS and what kind hardware (e.g. RS232 board) for your Motor driver testing?

I did not test Marty's asyn3.2 code with RTEMS yet.  However, I think
it should be RTEMS ready if it is the latest version (R3.14.x compatible).
We use  VME Oms58 motor  controllers(no RS232 interface).


Regards,
Kate

References:

Re: RE: RTEMSfor MVME5500 hkm

Navigate by Date:

Prev: EPICS drivers for DAC/ ADC Industry Packs on a PCI carrier board Dorothea Wehler

Next: Industry Pack support under RTEMS available? Dorothea Wehler

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: RE: RTEMSfor MVME5500 hkm

Next: PPC benchmarks John Maclean

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024