Experimental Physics and
Industrial Control System

Motor Record users,

There is a problem with the Oregon Micro Systems (OMS)
VX2-006 ver 1.04 motor controller boards. The interrupt
control register is not cleared when the VX2 receives a
SYSRESET. This results in an IOC crash at boot-up if more
than one VX2 controller board is configured in the same
VME crate.

OMS has been notified and is working on the problem; but to
date, it has not been resolved. I will post a notice here when
it is resolved.

Regards,
Ron Sluiter

I sent the above message out to tech-talk earlier this year (02/27/04).
OMS has recently resolved this problem with it's "ver 1.05 " firmware
update.

References:

OMS VX2-006 motor controller problem Ronald L. Sluiter

Navigate by Date:

Prev: EDM Help File problems Steven . Banks

Next: LINUX/Comedi experience? Lawrence T. Hoff

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: OMS VX2-006 motor controller problem Ronald L. Sluiter

Next: Problem running edm (EPICS extension) Gaudenz Jud

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024