Experimental Physics and
Industrial Control System
| 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 <2004> 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 | Index | 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 <2004> 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 |
| <== Date ==> | <== Thread ==> |
|---|
| Subject: | Re: Buffer problems |
| From: | Tim Mooney <[email protected]> |
| To: | Tim Mooney <[email protected]> |
| Cc: | Mark Rivers <[email protected]>, Andrew Johnson <[email protected]>, [email protected] |
| Date: | Thu, 25 Mar 2004 11:48:41 -0600 |
One of our crates is seeing a similar problem, and it not benign for them either. The processor is an mv5100 running Tornado 2.02, using Andrew's mv5100-asd6_nodns BSP with boot flags = 0x1000, (which increases the number of network buffers) under EPICS 3.13.9.
Oops, that should have read EPICS 3.13.8.
-- Tim Mooney ([email protected]) (630)252-5417 Beamline Controls & Data Acquisition Group Advanced Photon Source, Argonne National Lab
- References:
- RE: Buffer problems Mark Rivers
- Re: Buffer problems Tim Mooney
- Navigate by Date:
- Prev: Re: Buffer problems Tim Mooney
- Next: Re: Tornado 2.2.1 Dirk Zimoch
- Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 <2004> 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
- Navigate by Thread:
- Prev: Re: Buffer problems Tim Mooney
- Next: RE: Buffer problems Mark Rivers
- Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 <2004> 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·