EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <20042005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <20042005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: OMS VX2-006 motor controller problem
From: "Ronald L. Sluiter" <[email protected]>
To: EPICS <[email protected]>
Date: Fri, 27 Feb 2004 16:41:49 -0600
Motor Record users,

There is a problem with the Oregon Micro Systems (OMS)
VX2-006 ver 1.04 motor controller boards.  The interrupt
control register is not cleared when the VX2 receives a
SYSRESET.  This results in an IOC crash at boot-up if more
than one VX2 controller board is configured in the same
VME crate.

OMS has been notified and is working on the problem; but to
date, it has not been resolved.  I will post a notice here when
it is resolved.

Regards,
Ron Sluiter



Replies:
OMS VX2-006 problem resolved Ronald L. Sluiter

Navigate by Date:
Prev: Re: print from interrupt Eric Norum
Next: Re: print from interrupt Allan Honey
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <20042005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: gtr1-2 for SIS3301. Andrew Johnson
Next: OMS VX2-006 problem resolved Ronald L. Sluiter
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <20042005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·