Hi -
If you need the 1365 communications part of the code,
we have a Linux driver for the original Hytec 1365 that
we developed for our (non-EPICS) control system. We are
moving to EPICS, and as an intermediate step have our
entire control system running as a 3.14 IOC on Linux. So,
we're running it under 3.14, but not as a native driver.
(I would like to port it to native EPICS, but haven't had
a chance to start yet.)
So, we don't have the camacLib part, but we do have the
ECC-1365 communications part (with an ESONE library). If
you think that can help, please let me know.
Paul
Paul Jines
Center for Advanced Microstructures and Devices
Louisiana State University
>----Original Message
>From: "Hammonds, John P." <[email protected]> on 02/04/2004 08:06 PM
>Subject: RE: Camac controll by using 3.14.4 on Linux
>I am looking to do this same thing using the Hytec 1365 Mk 4 Ethernet
>controller. I have the controller but have not yet started code. I
>would be interested to see what you have.
>John Hammonds
- Navigate by Date:
- Prev:
gpib controllers Terry Zammit
- Next:
VDCT strips \ character from field definitions Porter, Rodney R.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
gpib controllers Terry Zammit
- Next:
VDCT strips \ character from field definitions Porter, Rodney R.
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
<2004>
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|