Experimental Physics and
Industrial Control System

I am looking to do this same thing using the Hytec 1365 Mk 4 Ethernet
controller.  I have the controller but have not yet started code.  I
would be interested to see what you have.

John Hammonds
Data Acquisition Systems Manager
Intense Pulsed Neutron Source
[email protected]
(630)252-5317

> -----Original Message-----
> From: KOMIYAMA (KOBAYASHI) Misaki [mailto:[email protected]]
> Sent: Tuesday, February 03, 2004 11:23 PM
> To: [email protected]
> Subject: Camac controll by using 3.14.4 on Linux
> 
> Dear all,
> 
> Now, I am planning to control our CAMAC system by using a network
CAMAC
> crate controller, whose OS is Linux and I have already installed
R3.14.4
> on it.
> Since I could not find "camacLib.c" in 3.14.4 for Linux,
> I try to start to make "camacLib" for 3.14.4 for Linux with KEK
(Japan)
> and
> JAERI (Japan)
> as referring "camacLib" in R3.13.8.
> If someone has already made or started it, may I ask to inform to me?
> 
> Best Regards,
> Misaki KOMIYAMA (RIKEN, JAPAN)

Navigate by Date:

Prev: seq 2.0.8 now available, not 2.0.7 (but that also...) Laznovsky, Michael

Next: Missing messages from tech-talk Zoltan Kakucs

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Camac controll by using 3.14.4 on Linux KOMIYAMA (KOBAYASHI) Misaki

Next: RE: Camac controll by using 3.14.4 on Linux KOMIYAMA (KOBAYASHI) Misaki

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024