EPICS Home EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

Format page
for printing


Search Tech-talk
1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: Anybody using modtcp and Wago?
From: Eric Williams <[email protected]>
To: [email protected]
Date: Wed, 04 Feb 2004 13:21:48 -0800
I'm trying to get an IOC to talk to a Wago 750-842 Ethernet controller. The IOC builds OK with DESY's version of the modtcp driver, and modtcpReport says that I've successfully set up a read group to the Wago, but I'm not seeing my data (in this case, a 750-469 thermocouple input module) in the EPICS record. I suspect that I'm referencing the wrong address in the memory image, but I can't decipher Wago's documentation to figure it out. Does someone have a working example? Thanks!
--
Eric Williams, ALS

Navigate by Date:
Prev: Re: ChannelArchiver and gcc 3.2.2 on linux Kay Kasemir
Next: Base R3.14.5, and Open Licensing for Base Andrew Johnson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: genSub V1-5 Andy Foster
Next: Re: Anybody using modtcp and Wago? Ivan So
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·