Experimental Physics and Industrial Control System

Aloha

I have been getting various requests for EPICS R3.14 compatible versions
of drvSerial and drvAscii. I know of several sites which have done this.

If all those that have done this conversion would kindly send me a copy 
then perhaps I can collate and distribute. I am unsure of the status of 
the versions that have already been sent to me so, if you send me a copy, 
please indicate under which platforms you are using your version and 
whether or not it has been tested on other platforms.

Within the next 3-4 months I am hoping (to have time?) to convert drvAscii 
to be compatible with the Eric Norum/Marty Kraimer asynDriver design
pattern. Once that is done an official release will be forthcoming.
Although, I will need help testing as I only have tests beds for
Vxworks, UNIX, and (with a little work) LINUX.

HNY,
	Allan
	

 

Navigate by Date:

Prev: RE: Problem linking a Channel Access application on Windows using Visual Studio Russ Berg

Next: PV reconnect logic question Kevin Tsubota

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: RE: Problem linking a Channel Access application on Windows using Visual Studio Steven . Banks

Next: PV reconnect logic question Kevin Tsubota

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  2003  <2004>  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024