Experimental Physics and
Industrial Control System

Hi All:

I'd like to bring to your attention  a different motion controller: 
PMAC (Programmable Multi-Axis motion Controller) manufactured by Delta Tau (www.deltatau.com).

1) it allows synchronized motion of the multiple motors.
2) it allows to use servoloop with two encoders per motor, one - for position feedback, another - for velocity feedback (installed on the motor shaft).
3) it is supported by EPICS

This controller is capable to control motors of different types including step motors.

Oleg A. Makarov,
Beamline Instrumentation Scientist,
Phone: (630) 252 - 0668
Fax: (630) 252 - 0667

Argonne National Laboratory
9700 South Cass Avenue
Argonne, IL 60439-4861


 

References:

Re: Insertion Devices Control and EPICS Bob Dalesio

Re: Insertion Devices Control and EPICS David Maden

Re: Insertion Devices Control and EPICS Dirk Zimoch

Navigate by Date:

Prev: Re: Insertion Devices Control and EPICS Dirk Zimoch

Next: RE: Spurious link alarms generated? J. Frederick Bartlett

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <2003>  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: Insertion Devices Control and EPICS Dirk Zimoch

Next: Re: Insertion Devices Control and EPICS Nick Rees

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <2003>  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024