Subject: |
Re: EPICS periodic scan and sysClkRateSet() |
From: |
Steven Hartman <[email protected]> |
To: |
EPICS tech-talk <[email protected]> |
Date: |
Mon, 17 Nov 2003 11:15:44 -0500 (EST) |
On Mon, 17 Nov 2003, David Maden wrote:
> If you change the clock rate, be careful with the "delay" function of
> the sequencer, at least with version 1.9.2.Beta12. The argument is no
> longer seconds if the tick rate is not 60 Hz.
Thanks. We are using sequencer-1.9.5 and it looks like this problem has
been fixed by this version. In seq-1.9.5, all the delays are relative to
sysClkRateGet(), so your conversion factor is no longer needed.
Note that this same problem does appear in some of the old device and
driver support which is included with base in 3.13. Other places in base
(3.13.7) where I have found taskDelay() using a constant include:
ca/vxWorks_depen.c
db/dbCa.c
rec/recWaitCa.c
--
Steve Hartman
[email protected] | 919-660-2650
Duke Free Electron Laser Laboratory
- Replies:
- RE: EPICS periodic scan and sysClkRateSet() Jeff Hill
- References:
- EPICS periodic scan and sysClkRateSet() Steven Hartman
- Re: EPICS periodic scan and sysClkRateSet() David Maden
- Navigate by Date:
- Prev:
Re: EPICS periodic scan and sysClkRateSet() David Maden
- Next:
RE: EPICS periodic scan and sysClkRateSet() Jeff Hill
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
<2003>
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: EPICS periodic scan and sysClkRateSet() David Maden
- Next:
RE: EPICS periodic scan and sysClkRateSet() Jeff Hill
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
<2003>
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|