Experimental Physics and
Industrial Control System

1994 1995 1996 1997 1998 1999 2000 2001 2002 <2003> 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024	Index	1994 1995 1996 1997 1998 1999 2000 2001 2002 <2003> 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
<== Date ==>		<== Thread ==>

Subject:	Re: Help about building a example under cygwin
From:	Eric Norum <[email protected]>
To:	guobao shen <[email protected]>
Cc:	"[email protected]" <[email protected]>
Date:	Fri, 14 Nov 2003 15:45:23 -0600

guobao shen wrote:

Hello, everyone,
I have succeeded in building EPICS 3.14.4 base under Cygwin, windows 2000, but there is a problem when I
built  an example. My steps are:
 1. perl makeBaseApp.pl -t example example
 2. perl makeBaseApp.pl -i -t example example
 3. make

You need to give the full path to the perl script. Here's the output I obtained from building the example application on cygwin. No problems with building or running (well, link-edits are slooooow, but that may have more to do with our NFS setup than anything else).

BTW -- I've successfully built and run a cygwin IOC performing I/O to GPIB and serial devices using the soon-to-be-released asynDriver, devGpib and drvGenericSerial support.

--
Eric Norum                                 [email protected]
Advanced Photon Source                     Phone: (630) 252-4793
Argonne National Laboratory

Norume@CTLPC20 ~/src/chk/epics
$ mkdir wex

Norume@CTLPC20 ~/src/chk/epics
$ cd wex

Norume@CTLPC20 ~/src/chk/epics/wex
$ ~/src/EPICS/base_R3_14_2_branch/bin/win32-x86-cygwin/makeBaseApp.pl -t exampl
e myExample

Norume@CTLPC20 ~/src/chk/epics/wex
$ ~/src/EPICS/base_R3_14_2_branch/bin/win32-x86-cygwin/makeBaseApp.pl -i -t exa
mple myExample
The following target architectures are available in base:
    linux-x86
    solaris-sparc
    darwin-ppc
    vxWorks-ppc604
    vxWorks-ppc603
    vxWorks-68040
    win32-x86-cygwin
    RTEMS-pc386
What architecture do you want to use? win32-x86-cygwin

Norume@CTLPC20 ~/src/chk/epics/wex
$ make
make -C configure install
make[1]: Entering directory `/cygdrive/p/src/chk/epics/wex/configure'
perl /home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/configure/tools/convertR
elease.pl -h win32-x86-cygwin checkRelease
perl /home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/configure/tools/makeMake
file.pl O.win32-x86-cygwin ../..
mkdir O.Common
make -C O.win32-x86-cygwin -f ../Makefile TOP=../.. T_A=win32-x86-cygwin install

make[2]: Entering directory `/cygdrive/p/src/chk/epics/wex/configure/O.win32-x86
-cygwin'
perl /home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/configure/tools/convertR
elease.pl -h win32-x86-cygwin CONFIG_APP_INCLUDE
perl /home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/configure/tools/convertR
elease.pl -h win32-x86-cygwin RULES_INCLUDE
make[2]: Leaving directory `/cygdrive/p/src/chk/epics/wex/configure/O.win32-x86-
cygwin'
make[1]: Leaving directory `/cygdrive/p/src/chk/epics/wex/configure'
make -C myExampleApp install
make[1]: Entering directory `/cygdrive/p/src/chk/epics/wex/myExampleApp'
make -C src install
make[2]: Entering directory `/cygdrive/p/src/chk/epics/wex/myExampleApp/src'
perl /home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/configure/tools/makeMake
file.pl O.win32-x86-cygwin ../../..
mkdir O.Common
make -C O.win32-x86-cygwin -f ../Makefile TOP=../../.. T_A=win32-x86-cygwin inst
all
make[3]: Entering directory `/cygdrive/p/src/chk/epics/wex/myExampleApp/src/O.wi
n32-x86-cygwin'
make[3]: Leaving directory `/cygdrive/p/src/chk/epics/wex/myExampleApp/src/O.win
32-x86-cygwin'
make[3]: Entering directory `/cygdrive/p/src/chk/epics/wex/myExampleApp/src/O.wi
n32-x86-cygwin'
Expanding dbd
/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/bin/win32-x86-cygwin/dbExpand
.exe  -I . -I .. -I ../../../dbd -I /home/phoebus/NORUME/src/EPICS/base_R3_14_2_
branch/dbd -o ../O.Common/myExample.dbd ../myExampleInclude.dbd
Installing dbd file ../../../dbd/xxxSupport.dbd
mkdir ../../../dbd
Installing dbd file ../../../dbd/myExample.dbd
Installing dbd file ../../../dbd/xxxRecord.dbd
/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/bin/win32-x86-cygwin/dbToReco
rdtypeH.exe  -I . -I .. -I ../../../dbd -I /home/phoebus/NORUME/src/EPICS/base_R
3_14_2_branch/dbd  ../xxxRecord.dbd ../O.Common/xxxRecord.h
Installing generated generic include file ../../../include/xxxRecord.h
mkdir ../../../include
gcc -c   -D_POSIX_THREADS -D_POSIX_TIMERS        -D_X86_  -DUNIX  -DCYGWIN32 -U_
WIN32   -pedantic  -O3  -Wall           -I. -I.. -I../../../include/os/cygwin32
-I../../../include -I/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/include/
os/cygwin32 -I/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/include
../xxxRecord.c
In file included from ../xxxRecord.c:15:
/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/include/devSup.h:50:3: warnin
g: C++ style comments are not allowed in ISO C89
/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/include/devSup.h:50:3: warnin
g: (this will be reported only once per input file)
gcc -c   -D_POSIX_THREADS -D_POSIX_TIMERS        -D_X86_  -DUNIX  -DCYGWIN32 -U_
WIN32   -pedantic  -O3  -Wall           -I. -I.. -I../../../include/os/cygwin32
-I../../../include -I/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/include/
os/cygwin32 -I/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/include
../devXxxSoft.c
In file included from ../devXxxSoft.c:15:
/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/include/devSup.h:50:3: warnin
g: C++ style comments are not allowed in ISO C89
/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/include/devSup.h:50:3: warnin
g: (this will be reported only once per input file)
ar -rc   libxxxSupport.a      xxxRecord.o devXxxSoft.o
ranlib libxxxSupport.a
Installing library ../../../lib/win32-x86-cygwin/libxxxSupport.a
mkdir ../../../lib
mkdir ../../../lib/win32-x86-cygwin
ranlib ../../../lib/win32-x86-cygwin/libxxxSupport.a
perl /home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/bin/win32-x86-cygwin/reg
isterRecordDeviceDriver.pl ../O.Common/myExample.dbd myExample_registerRecordDev
iceDriver > myExample_registerRecordDeviceDriver.cpp
g++ -c   -D_POSIX_THREADS -D_POSIX_TIMERS        -D_X86_  -DUNIX  -DCYGWIN32 -U_
WIN32   -pedantic  -O3  -Wall           -I. -I.. -I../../../include/os/cygwin32
-I../../../include -I/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/include/
os/cygwin32 -I/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/include
myExample_registerRecordDeviceDriver.cpp
gcc -c   -D_POSIX_THREADS -D_POSIX_TIMERS        -D_X86_  -DUNIX  -DCYGWIN32 -U_
WIN32   -pedantic  -O3  -Wall           -I. -I.. -I../../../include/os/cygwin32
-I../../../include -I/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/include/
os/cygwin32 -I/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/include
../dbSubExample.c
g++ -c   -D_POSIX_THREADS -D_POSIX_TIMERS        -D_X86_  -DUNIX  -DCYGWIN32 -U_
WIN32   -pedantic  -O3  -Wall           -I. -I.. -I../../../include/os/cygwin32
-I../../../include -I/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/include/
os/cygwin32 -I/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/include
../myExampleMain.cpp
g++ -o myExample.exe  -L/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/lib/w
in32-x86-cygwin/ -Lp:/src/chk/epics/wex/lib/win32-x86-cygwin//                 m
yExample_registerRecordDeviceDriver.o dbSubExample.o myExampleMain.o    -lxxxSup
port -lrecIoc -lsoftDevIoc -ltestDevIoc -liocsh -lmiscIoc -lrsrvIoc -ldbtoolsIoc
 -lasIoc -ldbIoc -lregistryIoc -ldbStaticIoc -lca -lCom      -lm
Installing binary ../../../bin/win32-x86-cygwin/myExample.exe
mkdir ../../../bin
mkdir ../../../bin/win32-x86-cygwin
make[3]: Leaving directory `/cygdrive/p/src/chk/epics/wex/myExampleApp/src/O.win
32-x86-cygwin'
make[2]: Leaving directory `/cygdrive/p/src/chk/epics/wex/myExampleApp/src'
make -C Db install
make[2]: Entering directory `/cygdrive/p/src/chk/epics/wex/myExampleApp/Db'
perl /home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/configure/tools/makeMake
file.pl O.win32-x86-cygwin ../../..
mkdir O.Common
make -C O.win32-x86-cygwin -f ../Makefile TOP=../../.. T_A=win32-x86-cygwin inst
all
make[3]: Entering directory `/cygdrive/p/src/chk/epics/wex/myExampleApp/Db/O.win
32-x86-cygwin'
Installing db file ../../../db/dbExample1.db
mkdir ../../../db
Installing db file ../../../db/dbExample2.db
Installing db file ../../../db/dbSubExample.db
make[3]: Leaving directory `/cygdrive/p/src/chk/epics/wex/myExampleApp/Db/O.win3
2-x86-cygwin'
make[2]: Leaving directory `/cygdrive/p/src/chk/epics/wex/myExampleApp/Db'
make[1]: Leaving directory `/cygdrive/p/src/chk/epics/wex/myExampleApp'
make -C iocBoot install
make[1]: Entering directory `/cygdrive/p/src/chk/epics/wex/iocBoot'
make -C iocmyExample install
make[2]: Entering directory `/cygdrive/p/src/chk/epics/wex/iocBoot/iocmyExample'

perl /home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch/configure/tools/convertR
elease.pl -a win32-x86-cygwin envPaths
make[2]: Leaving directory `/cygdrive/p/src/chk/epics/wex/iocBoot/iocmyExample'
make[1]: Leaving directory `/cygdrive/p/src/chk/epics/wex/iocBoot'

Norume@CTLPC20 ~/src/chk/epics/wex
$ cd iocBoot/iocmyExample/

Norume@CTLPC20 ~/src/chk/epics/wex/iocBoot/iocmyExample
$ ../../bin/win32-x86-cygwin/myExample.exe st.cmd
< envPaths
epicsEnvSet(ARCH,"win32-x86-cygwin")
epicsEnvSet(IOC,"iocmyExample")
epicsEnvSet(TOP,"p:/src/chk/epics/wex")
epicsEnvSet(EPICS_BASE,"/home/phoebus/NORUME/src/EPICS/base_R3_14_2_branch")
cd p:/src/chk/epics/wex
dbLoadDatabase("dbd/myExample.dbd")
myExample_registerRecordDeviceDriver(pdbbase)
dbLoadRecords("db/dbExample1.db","user=NorumeHost")
dbLoadRecords("db/dbExample2.db","user=NorumeHost,no=1,scan=1 second")
dbLoadRecords("db/dbExample2.db","user=NorumeHost,no=2,scan=2 second")
dbLoadRecords("db/dbExample2.db","user=NorumeHost,no=3,scan=5 second")
dbLoadRecords("db/dbSubExample.db","user=NorumeHost")
cd p:/src/chk/epics/wex/iocBoot/iocmyExample
iocInit()
Starting iocInit
############################################################################
###  EPICS IOC CORE built on Nov 12 2003
###  EPICS R3.14.4 $$Name:  $$ $$Date: 2003/09/23 21:35:11 $$
############################################################################
iocInit: All initialization complete
epics> dbl
NorumeHost:aiExample
NorumeHost:aiExample1
NorumeHost:aiExample2
NorumeHost:aiExample3
NorumeHost:calcExample
NorumeHost:calcExample1
NorumeHost:calcExample2
NorumeHost:calcExample3
NorumeHost:compressExample
NorumeHost:subExample
NorumeHost:xxxExample
epics> dbpr NorumeHost:aiExample
ASG:                DESC: Analog input  DISA: 0             DISP: 0

DISV: 1             NAME: NorumeHost:aiExample              RVAL: 0

SEVR: MINOR         STAT: LOW           SVAL: 0             TPRO: 0

VAL: 4
epics> exit

Norume@CTLPC20 ~/src/chk/epics/wex/iocBoot/iocmyExample

References:: Help about building a example under cygwin guobao shen

Navigate by Date:: Prev: 3.13.6/3.13.8 Client/Server compilations with gcc Rosemary Alles; Next: Re: Help about building a example under cygwin Andrew Johnson; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 <2003> 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024
Navigate by Thread:: Prev: Re: Help about building a example under cygwin Andrew Johnson; Next: National Instruments VME-MXI-1 modules vs. modern VME CPU modules Eric Norum; Index: 1994 1995 1996 1997 1998 1999 2000 2001 2002 <2003> 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024

ANJ, 10 Aug 2010

· Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System