Experimental Physics and
Industrial Control System

At 08:35 5/22/2003, BOTHNER Udo (562.73) wrote:

>Hi,
>
>At a guess K-U Kasemir knows the answer...
>
>When using the LABVIEW PVxxxx.vi tools in SERVER-mode to handle
>a boolean from MEDM (with a Choice Button), MEDM shows a
>10-buttons widget (because DBR_CTRL_ENUM = 10) instead of the
>normally "ON/OFF" pair (when DBR_CTRL_ENUM = 2)
>
>I can't locate where this "10" default value comes from.

It's an error in the ActiveX CA Server:
Trying to be smart about allocating memory,
I made the enum string array jump in increments of 10.

Navigate by Date:

Prev: Re: R3.14.2 is available Marty Kraimer

Next: RE: R3.14.2 is available -- SEQ v2.0.4 @ SLAC Laznovsky, Michael

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <2003>  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: ENUM with LABVIEW CAserver BOTHNER Udo (562.73)

Next: R3.14.2 is available Marty Kraimer

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <2003>  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024