EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: Explicit initializing of Sub-Record
From: Benjamin Franksen <[email protected]>
To: [email protected]
Date: Tue, 20 May 2003 15:22:35 +0200
Joerg Kuehne wrote:
> 
> Did anyone know how I could explicit decide an initializing of a
> sub-record?

The subRecord does not provide for this. In the record support, the
address of the routine whose name is given in field INAM is thrown away
after init_record has executed it. There are two obvious solutions to
your problem:

1) Create an enhanced version of the subRecord which saves the init
routine's address and executes it under certain conditions.

2) Write your subroutine so that it calls the record's init routine,
depending on the value of some of the input fields.

Ben

References:
Explicit initializing of Sub-Record Joerg Kuehne

Navigate by Date:
Prev: Explicit initializing of Sub-Record Kuehne Joerg
Next: job openings Pedro Gigoux
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Explicit initializing of Sub-Record Joerg Kuehne
Next: Explicit initializing of Sub-Record Kuehne Joerg
Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <20032004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·