Experimental Physics and
Industrial Control System

hi,all,
The baseR3.14* ioc example supplies a xxx device support, may I add a driver support in the same way? My target is rtems-pc386.  It seems to me that there're two ways. First,directly wirte driver support routines according to EPICS driver table format. Second, wrap a driver with RTEMS IO manager, then invoke the driver's routines in device support layer.
what's the recommended way to add a driver support layer by EPICS?

--
Shao Mingchao
Engineering Physics Department
Tsinghua University
Beijing,100084,China
Tel:86-10-62784552

Navigate by Date:

Prev: how to prevent ioc app from being built for both target and host? M.C.Shao

Next: NI1014 GPIB controller Marty Kraimer

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <2003>  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: how to prevent ioc app from being built for both target and host? Till Straumann

Next: NI1014 GPIB controller Marty Kraimer

Index: 1994  1995  1996  1997  1998  1999  2000  2001  2002  <2003>  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024