I am porting a device drvier for the Joerger scaler VSC16
from vxWorks to RTEMS. The EPICS release is R3.14.0beta2.
The IOC ran the scaler_init routine sucessfully. However,
it failed somewhere before (? or in ?) the scaler_init_record
routine. The erro message is :
A call to "assert (!plink->value.pv_link.pvt)" failed in ../dbCa.c line 157.
EPICS Release EPICS R3.14.0.beta.2 $R3-14-0-beta-2$ $2002/07/30 21:40:55$.
Current time Wed Mar 26 2003 16:46:05.420000000.
Please E-mail this message to the author or to [email protected]
Calling epicsThreadSuspendSelf()
Here it is. I am reporting this error to the tech-talk. Any clue ?
The problem is that the error did not mention which line of the database
triggered the error. I was able to load database for a bitIO device
sucessfully with the same platform.
Any pointer would be highly appreciated,
Kate
- Replies:
- Re: "assert (!plink->value.pv_link.pvt)" failed Marty Kraimer
- Navigate by Date:
- Prev:
problem with SNC/SEQ Version 1.9.2.Beta12 Oleg Makarov
- Next:
Re: medm unable to contact CA repeater after 50 tries M.C.Shao
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
<2003>
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
problem with SNC/SEQ Version 1.9.2.Beta12 Oleg Makarov
- Next:
Re: "assert (!plink->value.pv_link.pvt)" failed Marty Kraimer
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
<2003>
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|