Experimental Physics and Industrial Control System
M.C.Shao wrote:
> hi,all
>
> When I use baseR3.14.1 on i386-rtems target, I have serious problems.The
> following is the configuration of my building environment:
>
>
-- snip --
> --------------------
>
> make[3]: Entering directory
> `/usr/local/epics/exampleApp/testApp/src/O.RTEMS-pc386'
> /opt/rtems/bin/i386-rtems-g++ -B/opt/rtems/i386-rtems/pc386/lib/ -specs
> bsp_specs -qrtems -o example
> -L/usr/local/epics/base/lib/RTEMS-pc386/ -u Init
> /opt/rtems/i386-rtems/pc386/lib/no-dpmem.rel
> /opt/rtems/i386-rtems/pc386/lib/no-mp.rel
> /opt/rtems/i386-rtems/pc386/lib/no-part.rel
> /opt/rtems/i386-rtems/pc386/lib/no-signal.rel
> /opt/rtems/i386-rtems/pc386/lib/no-rtmon.rel -Wl,-Ttext,0x100000
> xxxRecord.o devXxxSoft.o dbSubExample.o
> example_registerRecordDeviceDriver.o exampleMain.o -lrecIoc
> -lsoftDevIoc -ltestDevIoc -liocsh -lmiscIoc -lrsrvIoc -ldbtoolsIoc
> -lasIoc -ldbIoc -lregistryIoc -ldbStaticIoc -lca -lCom -ltecla_r
> -lncurses -lm -lrtemsCom -lrtemscpu -lCom -lm
Unrelated to the original question: couldn't/shouldn't we remove the
ncurses dependency under RTEMS?
-- Till
- Replies:
- Re: anyone using EPICS baseR3.14.1 on rtems target? Eric Norum
- Navigate by Date:
- Prev:
Re: jefferson lab ioc statistics Ralph Lange
- Next:
Re: anyone using EPICS baseR3.14.1 on rtems target? Eric Norum
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
<2003>
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: jefferson lab ioc statistics Zoltan Kakucs
- Next:
Re: anyone using EPICS baseR3.14.1 on rtems target? Eric Norum
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
2002
<2003>
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024