Experimental Physics and
Industrial Control System

hi, 
I am building R3.14 for RTEMS 4.5.0.  During make process, it was said that "/opt/rtems/bin//opt/rtems/bin/i386-rtems/gcc: command not found".Obviously,the path is wrong,it should be "/opt/rtems/bin/i386-rtems/gcc".I have checked all the configure files, but didn't figure out where to address this problem.Please give me some suggestions.It seems that you're using old versions of RTEMS. but the directory architecture of  new RTEMS versions is different from old ones.

M.C.Shao
"yesterday is a history,tomorrow is a mystery,today is a gift.that's why we call it present"--by someone

Replies:

Re: building R3.14 problem for RTEMS Till Straumann

References:

Extensions problem Krishna Arya

Re: Extensions problem Andrew Johnson

base building problem M.C.Shao

Re: base building problem Andrew Johnson

Navigate by Date:

Prev: Re: Channel Watcher V2.0 Steve Lewis

Next: alarms and autodialers Peregrine M. McGehee

Index: 1994  1995  1996  1997  1998  1999  2000  2001  <2002>  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: how about using a new IOC host OS? M.C.Shao

Next: Re: building R3.14 problem for RTEMS Till Straumann

Index: 1994  1995  1996  1997  1998  1999  2000  2001  <2002>  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024