Hi, all,
epics has run successfully for more than two years on our x86 based ioc at
National Synchrotron Radiation Lab(epics:3.13.1, VxWorks:5.3.1). Recently
we added a IOC (total 7 IOCs), and get the following error after the IOC
run about 2 days:
Page Fault
Program Counter: 0x001314c0
Status Register: 0x00010206
Error Code:0x00000000
Task: 0x7d9d260 "CA UDP"
filename="../taskwd.c" line number=175
Task: 0x7d9d260 CA UDP suspended
When I rlogin the IOC from host and try to reboot the IOC using "ctlr X",
the folling error is displayed on the IOC:
0x7f7b174 (CA online): ../online_notify.c "ca beacon error was "errno =
0x3e"
Could anybody give me some idea about it?
Thanks in advance.
Gongfa Liu
- Replies:
- RE: ask for help about ca Jeff Hill
- Navigate by Date:
- Prev:
Re: Recommendations for Power PC VME cards Matthias Clausen
- Next:
RE: ask for help about ca Jeff Hill
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
<2002>
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Python software for EPICS beamline control Mark Rivers
- Next:
RE: ask for help about ca Jeff Hill
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
<2002>
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|