Tech Talkers,
I need some guidance on how to get Labview variables incorporated in a
separate data-recording stream. The data acquisition system in question is
EPICS-aware; we can read any PV that is out there on the network. The
problem is getting the Labview application to present its data to the
EPICS world.
My guess is that the best thing going now is described at:
http://mesa53.lanl.gov/lansce8/Epics/ActiveXCAServer/default.htm
but since that is only a guess, I would like to hear other opinions.
Thanks in advance.
-- Mark
--
Mark M. Ito, Thomas Jefferson National Accelerator Facility
12000 Jefferson Ave., Mail Stop 12H, Newport News, VA 23606
Email: [email protected], Phone: (757)269-5295
WWW: http://claspc2.jlab.org
- Replies:
- RE: Lab view <-> EPICS David H. Thompson
- Navigate by Date:
- Prev:
Re: subRecord fix Andrew Johnson
- Next:
Siemens/Profibus Drivers Robby Tanner
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
<2002>
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: subRecord fix Marty Kraimer
- Next:
RE: Lab view <-> EPICS David H. Thompson
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
<2002>
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|