EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  <20022003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  <20022003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: switch clock
From: "Garrett D. Rinehart" <rinehart>
To: [email protected], [email protected]
Date: Tue, 6 Aug 2002 14:43:36 -0500 (CDT)
> ...I want is to set one or more
> binary output channels according to the actual time. For example: Output
> 1 should be active every tuesday between 8am and 10am. 

Does this have to be done in the ioc, or can the command originate from a 
workstation? A simple "cron" command calling "caput" can do this very easily 
from a Linux/Unix workstation.

Garrett Rinehart
Control and Data Acquisition System Manager
Accelerator Operations Group
Intense Pulsed Neutron Source
Argonne National Laboratory
9700 S. Cass Ave
Argonne, IL  60439
(630)252-6561



Navigate by Date:
Prev: Beyond naming conventions Peregrine M. McGehee
Next: [Fwd: Re: Beyond naming conventions] Peregrine M. McGehee
Index: 1994  1995  1996  1997  1998  1999  2000  2001  <20022003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: switch clock Maren Purves
Next: Tornado-2 arp-table Bernd Schoeneburg
Index: 1994  1995  1996  1997  1998  1999  2000  2001  <20022003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·