EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  <2002>  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  <2002>  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>
Subject: Re: GreenSpring memory
From: "Burkhard W. Kolb" <[email protected]>
To: John Faucett <[email protected]>
Cc: [email protected]
Date: Mon, 01 Jul 2002 10:07:36 +0200
Hi John,

I had a similar problem with the ipOctal card when I have alse an TEWS
Tip810 canbus card on a 162. The one address which is used to map the interrupt vector of the ipOctal card does not seem to be setup in the
mapping registers to point to the internal address on the IP card, but
rather seems to be mapped to VME space. I put an external memory card
in the crate and the problem goes away.
Looks like the mapping register setup is done in a separate thread and
not finished yet when the drivers try to access the registers.

Burkhard

Replies:
Re: GreenSpring memory Andrew Johnson
References:
GreenSpring memory John Faucett
Navigate by Date:
Prev: Re: waveform calculations Peregrine M. McGehee
Next: Re: GreenSpring memory Andrew Johnson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  <2002>  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: GreenSpring memory John Faucett
Next: Re: GreenSpring memory Andrew Johnson
Index: 1994  1995  1996  1997  1998  1999  2000  2001  <2002>  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024