Experimental Physics and Industrial Control System
Xiaosong,
Right. My driver is based around the Signetics SCC2698
UART which is the basis for the old IP-OCTAL-232/422/485
modules.
This driver is not compatible with the IP-OctalPlus family
as the release notes indicate.
To the community: Any one have plans to migrate to the
Ip-OctalPlus IPMs? [I presently do not].
"Geng, Xiaosong" wrote:
> The driver bundled with the drvIpac is for IP-OCTAL-485, but not for
> IP-OCTAL-Plus-485 which uses different chips from IP-OCTAL-485, right?
> I wanted to ask you if the new driver had been developed by you, if yes, it
> will be great to share it.
Aloha,
Peregrine
--
Peregrine M. McGehee [email protected] (505) 667-3273
Sloan Digital Sky Survey / Spallation Neutron Source
MS H820, Los Alamos National Laboratory, Los Alamos, NM 87545
- Navigate by Date:
- Prev:
Support for Allen Bradley FlexLogix? Rarback, Harvey
- Next:
epics-3.14/seq2.0.2 on pc104 card running linux Arne P. Freyberger
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
<2002>
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Support for Allen Bradley FlexLogix? Rarback, Harvey
- Next:
epics-3.14/seq2.0.2 on pc104 card running linux Arne P. Freyberger
- Index:
1994
1995
1996
1997
1998
1999
2000
2001
<2002>
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024