Experimental Physics and
Industrial Control System

We are using the iocLogServer to log messages from our IOCs.  Some of these
messages appear "doubled" in the log files.

For example, when these messages appear on the console:

ecs1> iocInit: All initialization complete
ecs1> 0x9e54b8 (SerialWT): ../drvAscii.c (3360) : [/tyGS/0/0] receive failed (3d0004)

the log file contains:

ecs1.mit.edu:1038 Thu Jan 24 15:47:23 2002 iocInit: All initialization complete
ecs1.mit.edu:1038 Thu Jan 24 15:51:47 2002 0xcInit: All initialization complete
ecs1.mit.edu:1038 Thu Jan 24 15:51:47 2002 9e54b8 (SerialWT): ../drvAscii.c (3358) : [/tyGS/0/0] receive failed (ffffffff)

The last two messages are typical of the problem in that an old message has
been "inserted" into the new one.

----
Brian McAllister                    Controls Programmer/Beam Physicist
[email protected]                        MIT-Bates Linear Accelerator
(617) 253-9537                                           Middleton, MA

Navigate by Date:

Prev: Support for Xycom XIP-2445 Rarback, Harvey

Next: URGENT! SPg

Index: 1994  1995  1996  1997  1998  1999  2000  2001  <2002>  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Support for Xycom XIP-2445 Rarback, Harvey

Next: URGENT! SPg

Index: 1994  1995  1996  1997  1998  1999  2000  2001  <2002>  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024