Experimental Physics and
Industrial Control System

Eric,
I am using the VMIC 5532 VMEbus Link Repeater.  There is no
software required, only jumpers on the (optic) transmit and
receive boards.  They add 4 microseconds per transfer for
single transfers.  This might be lower (per xfer) for a
block transfer.

I don't use VMEbus interrupts on the remote crate, but I do
recall something about remote interrupts not being fully
supported.

Don't know about VME64, but they have datasheets on their
website.

--
Paul Sichta
Princeton Plasma Physics Laboratory
609-243-3477       FAX 3030


----- Original Message -----
From: "Eric Bjorklund" <[email protected]>
To: <[email protected]>
Sent: Monday, January 28, 2002 10:41 AM
Subject: VME Crate Bridges


> Greetings.
>
> Does anyone have any experience (good or bad) with
VMEbus-to-VMEbus bridge
> modules?  Are there any commercial manufacturers?  Are
there any issues
> with VME64x?
>
> Thanks,
>
> Eric Bjorklund
> SNS Global Controls
>
>

References:

VME Crate Bridges Eric Bjorklund

Navigate by Date:

Prev: Re: VME Crate Bridges Kate Feng

Next: CapFast PC training license Dr. Chong Lee

Index: 1994  1995  1996  1997  1998  1999  2000  2001  <2002>  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Re: VME Crate Bridges Kate Feng

Next: CapFast PC training license Dr. Chong Lee

Index: 1994  1995  1996  1997  1998  1999  2000  2001  <2002>  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024