g+
g+ Communities
Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  2001  <20022003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  Index 1994  1995  1996  1997  1998  1999  2000  2001  <20022003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014 
<== Date ==> <== Thread ==>

Subject: IOC mesage at startup
From: john sinclair <sinclair@mail.phy.ornl.gov>
To: tech talk <tech-talk@aps.anl.gov>
Date: Fri, 18 Jan 2002 11:53:06 -0500 (EST)
Arch = x86
EPICS = R3.13.4
VxWorks = tornado 2

I am getting the following message around 10-20 seconds after an iocInit:

  Unable to contact CA repeater after 50 tries
  Silence this message by starting a CA repeater daemon

What does this mean?

Examining VxWorks tasks gives (among other things)

  CA_repeater3e65f04   3cd9650 181 PEND   14db1c  3cd94d8   0  0


Its seems that this message is a recent occurrence, but I don't think I
have made any system level changes recently.

John Sinclair
sinclair@mail.phy.ornl.gov
Oak Ridge National Lab
865-576-6362   865-574-1268 (fax)



Replies:
RE: IOC mesage at startup Jeff Hill

Navigate by Date:
Prev: how to handle periodic bad readings and alarms Geoff Savage
Next: RE: how to handle periodic bad readings and alarms Allison, Stephanie
Index: 1994  1995  1996  1997  1998  1999  2000  2001  <20022003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014 
Navigate by Thread:
Prev: RE: how to handle periodic bad readings and alarms Allison, Stephanie
Next: RE: IOC mesage at startup Jeff Hill
Index: 1994  1995  1996  1997  1998  1999  2000  2001  <20022003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· EPICSv4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·