EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  2000  2001  <20022003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  2001  <20022003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Use of ethernet-controlled devices in EPICS
From: Robert Willson <[email protected]>
To: EPICS Techtalk <[email protected]>
Date: Tue, 8 Jan 2002 16:18:55 -0500 (EST)
I need a basic understanding of how EPICS can be used to control various
ethernet controlled devices.  The two that I am using now are a network
power switch and an ethernet-to-GPIB interface
(http://www.ni.com/pdf/products/us/2inst628-631.pdf)

Thanks,

Robert Willson
[email protected]









Navigate by Date:
Prev: Re: VXI driver support John Faucett
Next: Unix process & file system & disk space monitoring Chestnut, Ronald P.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  <20022003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: VXI driver support John Faucett
Next: Unix process & file system & disk space monitoring Chestnut, Ronald P.
Index: 1994  1995  1996  1997  1998  1999  2000  2001  <20022003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024