EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  2000  <20012002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  2000  <20012002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: Re: Using a terminal server to catch boot messages
From: john sinclair <[email protected]>
To: Nick Rees <[email protected]>
Cc: [email protected]
Date: Wed, 7 Nov 2001 10:15:43 -0500 (EST)
We use another device to accomplish the same objectives. Its a small unit
made by Rabbit Semiconductor. We used their development kit to build a
single connection telnet server and also added a relay for remote power
cycles. The SNS guys put together a packaging design that incorporates a
powere supply, rabbit board, relay, and receptacle on a din rail. The
rabbit board sells for about $150. I don't recall the prices of the other
components. We would gladly provide our software.

Using this device we can observe VxWorks boot messages and perform a
remote power cycle of the IOC.

This is a very nice product. The development kit comes with a number of
example applications. In half a day I was talking to the board from a
telnet client and a web browser (the telnet server and http server are
different applications; I could do one or the other).

John Sinclair
[email protected]
Oak Ridge National Lab
865-576-6362   865-574-1268 (fax)

On Tue, 6 Nov 2001, Nick Rees wrote:

> All,
> 
> Just because it hasn't really been mentioned in this thread, and specific
> products may be of interest, we use remote console switches for this. The
> advantage over a terminal server is that it buffers the console output so
> you can look at recent activity, without resorting to disk files. The
> price is pretty comparable.
> 
> Our current favorite is the CMS series from Western Telematic 
> (www.wti.com). They allow multiple telnet sessions so you can still have
> all your xterms running, if you want. However, we have found that it is
> useful to have up to date firmware. $1300 for a 16 port system.
> 
> WTI also do remote power switches - the ones you telnet into and type
> 'reboot ioc1' and it very graciously interrupts the 110 volt supply from
> ioc1 for 5 seconds or so. Also useful to have. $600 for 8 separately
> switchable plugs and a total of 30 amps AC.
> 
> So, maybe a crass advert for WTI, but we find them useful since driving
> two hours to the summit just to reboot an ioc is a bit boring.
> 
> Cheers,
> 
> -- 
> Nick Rees
> 
> Joint Astronomy Centre               Ph:       +1 (808) 961-3756
> 660 N. Aohoku Place                  Fax:      +1 (808) 961-6516
> Hilo, HI.  96720                     Internet: [email protected]



References:
Re: Using a terminal server to catch boot messages Nick Rees

Navigate by Date:
Prev: Re: Using a terminal server to catch boot messages Nick Rees
Next: EPICS Meeting Agenda after ICALEPCS Dec. 3&4 Bob Dalesio
Index: 1994  1995  1996  1997  1998  1999  2000  <20012002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Re: Using a terminal server to catch boot messages Nick Rees
Next: Re: Using a terminal server to catch boot messages Pete R. Jemian
Index: 1994  1995  1996  1997  1998  1999  2000  <20012002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·