It may not be obvious, but SDIS cannot be read or modified
currently. Access needs to be set to Yes and Modify needs to
be set to Yes. If you want to cause the put to process the
record, set Proc to Yes. If you only want to process the
record if it is Passive and this field is put then set PP to
Yes.
Bob
2.1. Field Summary
Field Type DCT Initial Access Modify Rec Proc Monitor PP
SCAN GBLCHOICE Yes 0 Yes Yes No No
PINI GBLCHOICE Yes 0 Yes Yes No No
PHAS SHORT Yes 0 Yes Yes No No
EVNT SHORT Yes 0 Yes Yes No No
PRIO GBLCHOICE Yes 0 Yes Yes No No
DISV SHORT Yes 1 Yes Yes No No
DISA SHORT No 0 Yes Yes No No
SDIS INLINK Yes 0 No No N/A No
PROC UCHAR No 0 Yes Yes No Yes
DISS GBLCHOICE Yes 0 Yes Yes No No
LSET SHORT No 0 Yes No No
LCNT UCHAR No 0 Yes No No
PACT UCHAR No 0 Yes No No
FLNK FWDLINK Yes Null No No N/A No
Bob Dalesio
[email protected]
410 557 0297 Maryland
505 667 3414 Los Alamos
505 699 1632 Cell Phone
505 667 6087 Our Secretary (Judy)
- Navigate by Date:
- Prev:
Re: SSCAN record - changing SDIS from a stringout Bob Dalesio
- Next:
Re: drvTS/NTP issues? Brian McAllister
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: SSCAN record - changing SDIS from a stringout Marty Kraimer
- Next:
SDIS - my mistake Bob Dalesio
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|