Experimental Physics and
Industrial Control System

>>>>> "Matthew" == bickley  <[email protected]> writes:

 Matthew> I have a vague recollection that some labs have used a 
 Matthew> terminal server to record the boot messages generated by an 
 Matthew> IOC as it boots.  Is there some standard way for doing this, 
 Matthew> or is it completely dependent on the choice of server?  I 
 Matthew> would like to hear what choices other EPICS sites have made.

We have ours hooked to terminal servers, but have an hpterm/xterm with
logging turned on and have a "reverse telnet" (on Annexen) connection open
in the terminal window.  So we let the terminal window on the unix side do
the logging.

Jim

Replies:

Re: Using a terminal server to catch boot messages Noboru Yamamoto

References:

Using a terminal server to catch boot messages bickley

Navigate by Date:

Prev: Using a terminal server to catch boot messages bickley

Next: Re: Using a terminal server to catch boot messages Pete R. Jemian

Index: 1994  1995  1996  1997  1998  1999  2000  <2001>  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Using a terminal server to catch boot messages bickley

Next: Re: Using a terminal server to catch boot messages Noboru Yamamoto

Index: 1994  1995  1996  1997  1998  1999  2000  <2001>  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024