Folks,
We need to monitor about 700 thermocouples for the SPEAR3 upgrade. There will be about 40 TCs on 18 girders distributed around the 230m ring circumference.
The present plan is to monitor the temperatures at a few second intervals. We have a couple of quotes from PLC vendors, but they are fairly expensive.
Does anyone have a suggestion for hardware and software to accomplish our task? Of course the aim is to get the temperatures into an IOC.
--Harvey
----
Harvey Rarback phone: (650)926-3963
Stanford Linear Accelerator Center fax: (650)926-4100
2575 Sand Hill Road home phone: (650)560-9111
Menlo Park, CA 94025
[email protected]
- Replies:
- Re: How to monitor 700 thermocouples? Ralph . Lange
- Re: How to monitor 700 thermocouples? Paul Sichta
- Re: How to monitor 700 thermocouples? Steve Hunt
- Re: How to monitor 700 thermocouples? Maren Purves
- Re: How to monitor 700 thermocouples? Matthew Rippa
- Navigate by Date:
- Prev:
Re: CA and unsigned types Marty Kraimer
- Next:
Re: How to monitor 700 thermocouples? Ralph . Lange
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: CA and unsigned types Brian McAllister
- Next:
Re: How to monitor 700 thermocouples? Ralph . Lange
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|