On Fri, 10 Aug 2001, Rolf Keitel wrote:
> For some short-term and long-term planning I would like feedback on:
>
> a) vxWorks for Intel x86 architectures.
> Who is using it?
Holifield Radioactive Ion Beam Facility, ORNL
> What PC configurations are covered?
Looks like it will work with almost anything.
We are using a generic configuration:
o DFI motherboard
o 64 Mb
o Pentium IIIs in some, Celerons in others
o Greenspring PCI carrier board with RS232 modules
o Datalink technologies ISA DF1 card
> Which problems were encountered?
VxWorks 5.3.1 - Problem with select function, other unknown problems,
all in all, unacceptable.
VxWorks 5.4 (with all current patches) - This looks good; we converted to
5.4 on 6/5/2001 and have run since then with no problems. Previously, the
system would hang within two weeks.
John Sinclair
[email protected]
Oak Ridge National Lab
865-576-6362 865-574-1268 (fax)
- References:
- vxWorks, other ops Rolf Keitel
- Navigate by Date:
- Prev:
vxWorks, other ops Rolf Keitel
- Next:
Joerger VTR10012 Marty Kraimer
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
vxWorks, other ops Rolf Keitel
- Next:
Re: vxWorks, other ops Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|