In May 2000, I requested info on Arbitrary Funciton (Waveform) Generators. From
the replies, I chose a VMIC 4145. I now, finally, have the board but no software
to use it with EPICS. Karen White, who is listed as support contact for the
module, is probably traveling or something and has not returned my e-mail
request. Coles Sibley, who gave me lots of good info about the board last year,
is unreachable at the address on last year's e-mail. I've combed the EPICS sites
and the tech-talk archive and I cannot locate the device support anywhere.
Will someone please tell me where to get the software to be able to do something
with this board. I chose it because it was already supported. I don't want to
write a driver right now so the board is effectively an expensive paperweight.
Please, help!
Garrett Rinehart
Control and Data Acquisition System Manager
Accelerator Operations Group
Intense Pulsed Neutron Source
Argonne National Laboratory
9700 S. Cass Ave
Argonne, IL 60439
(630)252-6561
- Navigate by Date:
- Prev:
Re: Channel Archiver john sinclair
- Next:
Re: Error Message Zoltan Kakucs
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: Channel Archiver john sinclair
- Next:
Which EPICS Makefile variable should I use? J. Frederick Bartlett ([email protected])
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|