Experimental Physics and
Industrial Control System

I'm attempting to use V4.0 of the Motor Record with EPICS R3.13.1.

The driver is looking for devConnectInterruptVME(), which is in
base/src/db/devLibVxWorks.c, which is not built into iocCore by default.
The release notes state that this function is used instead of
devConnectInterrupt() for "EPICS base 3.13.1 compatibility".

I see that devLibVxWorks.c duplicates some functions in devLib.c, so it
doesn't look correct to include both.

Can anyone explain what the approach is ?

----
Brian McAllister                    Controls Programmer/Beam Physicist
[email protected]                        MIT-Bates Linear Accelerator
(617) 253-9537                                           Middleton, MA

Replies:

RE: devLib.c vs devLibVxWorks.c Jeff Hill

Re: devLib.c vs devLibVxWorks.c Ronald L. Sluiter

Navigate by Date:

Prev: Re: Newbie trying to move steppers in a CA client (fwd) Benjamin Franksen

Next: RE: devLib.c vs devLibVxWorks.c Jeff Hill

Index: 1994  1995  1996  1997  1998  1999  2000  <2001>  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: Help about RAMP shen guobao

Next: RE: devLib.c vs devLibVxWorks.c Jeff Hill

Index: 1994  1995  1996  1997  1998  1999  2000  <2001>  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024