Does this have anything to do with the fact that I'm
using CPP input link types so that the record will process
only on change?
> From [email protected] Thu Apr 26 17:20:11 2001
> Date: Thu, 26 Apr 2001 17:17:22 -1000 (HST)
> From: [email protected] (Kevin Tsubota)
> To: [email protected]
> Subject: dbCaLink and broadcast messages
> X-Sun-Charset: US-ASCII
> Content-Length: 498
>
>
>
> Hi,
>
> We're still using EPICS R3.13.0Beta12 and frc40s.
> In a recently installed application, I've discovered
> that its broadcasting the following message at a very
> high rate (~80-90 msgs/sec):
>
> laser3 -> 128.171.96.255 UDP D=5064 S=1026 LEN=56
>
> Looking through the documentation I found that UDP port 5064
> is used for process variable name resolution.
>
> Can anyone tell me how what exactly is it trying to do and
> how to fix it or at least reduce the broadcast rate.
>
> Thank you.
> Kevin Tsubota
>
>
- Navigate by Date:
- Prev:
RAMIX RM139 memory board and PowerPC Pedro Gigoux
- Next:
Re: devVXStats and task crash Marty Kraimer
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
RE: dbCaLink and broadcast messages Jeff Hill
- Next:
RAMIX RM139 memory board and PowerPC Pedro Gigoux
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|