Hi,
We're still using EPICS R3.13.0Beta12 and frc40s.
In a recently installed application, I've discovered
that its broadcasting the following message at a very
high rate (~80-90 msgs/sec):
laser3 -> 128.171.96.255 UDP D=5064 S=1026 LEN=56
Looking through the documentation I found that UDP port 5064
is used for process variable name resolution.
Can anyone tell me how what exactly is it trying to do and
how to fix it or at least reduce the broadcast rate.
Thank you.
Kevin Tsubota
- Replies:
- RE: dbCaLink and broadcast messages Jeff Hill
- Navigate by Date:
- Prev:
New MCP750s That Don't Run VxWorks Boot Code Susanna Jacobson
- Next:
Re: devVXStats and task crash Marty Kraimer
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
New MCP750s That Don't Run VxWorks Boot Code Susanna Jacobson
- Next:
RE: dbCaLink and broadcast messages Jeff Hill
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|