Experimental Physics and
Industrial Control System

Rolf Keitel <[email protected]> · Thu, 12 Apr 2001 18:35:19 -0700

At TRIUMF we use small CAN-based  controllers  for controlling approx. 550
electrostatic and magnetic power supplies. We use a simple home-made
protocol using Andrew Johnson's IP driver for the TIP810. No bad CAN
experiences to report.

- rolf -

John Maclean wrote:

> At the APS we are considering adopting CAN for one of our applications
> requiring some remote I/O.
>
> This particular project needs ~32 binary I/O channels and ~6 low res. (8
> to 12 bit) analog inputs per node.
>
> Is any one already using a similar off-the-shelf solution, or do people
> generally build their own custom CAN board? Is anyone interfacing
> CANopen or DEVICEnet products to EPICS?
>
> Someone, (management), also asked me if I knew of anyone who's had a bad
> experience with CAN. I didn't, but as a matter of interest I'd be
> interested to hear of any experiences with CAN, either bad or good.
>
> Thanks,
>
> John.

--
+-------------------------------------------------+
| Rolf Keitel, TRIUMF         Tel: (604) 222-7453 |
| Group Leader ISAC Controls  Fax: (604) 222-7307 |
| and Electronics Development                     |
| Vancouver, B.C., Canada                         |
+-------------------------------------------------+

Experimental Physics and Industrial Control System

Experimental Physics and
Industrial Control System