Or you can make the message go away by including this in the startup file ...
# Stop All SRQ processing and interrupts for GPIB
# Do this before iocInit
ibSrqLock = 1
Ned
>
> It looks like an instrument on the bus has requested service through the SRQ
> line - but the controller (the NI board) has not be told what to do with this
> interrupt (no pollabele devices). You will either need to configure the NI
board
> to handle the SRQ, configure the device generating it to NOT do that, or (my
> favorite) ignore the message on the console :)
>
> <josh>
>
> Vitaliy Vziskin wrote:
> >
> > When I run epics with NI gpib board I get following message
> >
> > 0xddfdb8 (ib-0x00): ibLinkTask(5, 0): got an SRQ, but have no pollable
> > devices!
> > Can someone tell me what this means?
>
>
> --
> +--------------------------------------+
> | S. Joshua Stein |
> | |
> | Electronics and Controls Engineer |
> | Accelerator Systems Division |
> | Advanced Photon Source |
> | Argonne National Laboratory |
> +--------------------------------------+
- Navigate by Date:
- Prev:
Re: GPIB SRQ question S. Joshua Stein
- Next:
Re: SNS's investigation of EDM Dave Gurd
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: GPIB SRQ question S. Joshua Stein
- Next:
Capfast Rules in 3.13.4 RULES.Host Andy Foster
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|