It looks like an instrument on the bus has requested service through the SRQ
line - but the controller (the NI board) has not be told what to do with this
interrupt (no pollabele devices). You will either need to configure the NI board
to handle the SRQ, configure the device generating it to NOT do that, or (my
favorite) ignore the message on the console :)
<josh>
Vitaliy Vziskin wrote:
>
> When I run epics with NI gpib board I get following message
>
> 0xddfdb8 (ib-0x00): ibLinkTask(5, 0): got an SRQ, but have no pollable
> devices!
> Can someone tell me what this means?
--
+--------------------------------------+
| S. Joshua Stein |
| |
| Electronics and Controls Engineer |
| Accelerator Systems Division |
| Advanced Photon Source |
| Argonne National Laboratory |
+--------------------------------------+
- References:
- GPIB SRQ question Vitaliy Vziskin
- Navigate by Date:
- Prev:
GPIB SRQ question Vitaliy Vziskin
- Next:
Re: GPIB SRQ question Ned Arnold
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
GPIB SRQ question Vitaliy Vziskin
- Next:
Re: GPIB SRQ question Ned Arnold
- Index:
1994
1995
1996
1997
1998
1999
2000
<2001>
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|