EPICS Home

Experimental Physics and Industrial Control System


 
1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: dbNameToAddr...
From: Mythili Srinivasan <[email protected]>
To: [email protected]
Date: Tue, 14 Dec 1999 18:45:37 -0500 (GMT)
Hi all!
  I'm running EPICS on target shell.Whenever I try commands involving the
routine, "dbNameToAddr" they get failed.Like,dba,dbpr etc.,.In short I'm
not able to access any fields of the record.
---------------------------------------------------------------------------
-> dba("aiExample1.VAL")
Record Address: 0x2 Field Address: 0x2 Field Description: 0x3b4c178
   No Elements: 62427488
   Record Type: 
data access
Exception current instruction address: 0x001347dc
Machine Status Register: 0x0000b030
Data Access Register: 0xbf3efbe7
Condition Register: 0x48400042
Data storage interrupt Register: 0x40000000

1b34ec vxTaskEntry    +60 : shell ()
1a4e68 shell          +18c: 1a4e94 ()
1a50b8 shell          +3dc: execute ()
1a523c execute        +d8 : yyparse ()
1d90c8 yyparse        +7a8: 1d7010 ()
1d7188 yystart        +8f8: dba ()
filename="../dbTest.c" line number=792
Record Not Found dbNameToAddr error
3a1b7fc dba            +38 : 3a1de98 ()
3a1df6c dbhcr          +270: 1a0930 ()
1a0930 fioFormatV     +784: strlen ()
shell restarted.

->dbPvdDump(pdbbase,1)
Process Variable Directory
dbPvdHashTableSize 512 dbPvdHashTableShift 1

025=001  tornado:calcExample
047=001  tornado:aiExample3
093=001  tornado:aiExample
223=001  tornado:aiExample2
303=001  tornado:calcExample1
311=001  tornado:xxxExample
315=001  tornado:calcExample3
319=001  tornado:aiExample1
353=001  tornado:calcExample2
End of Process Variable Directory
value = 35 = 0x23 = '#'
-> 
----------------------------------------------------------------------------
dbDumpPath gives a message that path was not found.Is that any problemm
with dbentry or pdbbase?

dbnr,scanppl,dbDumpFldDes,dbDumpRecord etc., are working fine.

All suggestions are invited.Thanks in advance.

Mythili.S.

p.s: One more thing,Whenever I tried to create an 'example' application
using templates,I've to make the files under each subdirectory
individually,as the 'Makefile' which is supposed to get created in
<apptop> is not getting created.This is the content of <apptop>

app1app  bin  config db dbd include iosBoot javalib





Navigate by Date:
Prev: stripTool Rolf Keitel
Next: Delay of Maximize Severity in OUT Links Benjamin Franksen
Index: 1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: stripTool Rolf Keitel
Next: Delay of Maximize Severity in OUT Links Benjamin Franksen
Index: 1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024