Experimental Physics and
Industrial Control System

>   I'm running EPICS on  target shell instead of windsh.All 
> the tasks are spawned. But,ioclogclient  prints some error
> messages related to 'S_errno_ENOBUFS'.This happens whenever it tries
> to create a  socket.

What version of EPICS are you using? The "ENOBUFS" indicates that
vxWorks has run out of network buffers. This sometimes occurs
if there are a large number of socket file descriptors in use.
To find out the details type "mbufShow", "iosFdShow", "inetstatShow".
Are you using Tornado II (or the SENS IP kernel with Tornado I)?

> For those which access the address of PV's like dba,dbpr thru
> dbNameToAddr,it prints out the diagnostic that record is
> not found.

Were your attempts to load records successful? Did iocInit complete?

Jeff

References:

[no subject] Mythili -TTP99

Navigate by Date:

Prev: Re: R3.14 iocCore/Linux john sinclair

Next: solaris 2.8/epics 3.13.2 John K.J. Dong

Index: 1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 

Navigate by Thread:

Prev: [no subject] Mythili -TTP99

Next: EPICS release R3.13.3 verse 3.13.0beta12 Leonard J. Reder

Index: 1994  1995  1996  1997  1998  1999  <2000>  2001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024