Hi Bill, Andrew and all,
I had a long discussion with Andrew about interrupt connection and interrupt
command problems. He convinced me to use the interrupt vector / vectors as a
parameter to the module drivers "create" - call. This makes interrupt vector
allocation flexible and open for the application programmer. The vector can
be given as a constant or it comes from a call to an allocation routine witch
can be a part of the carrier driver module. I modified my module drivers that
way.
Bernd
- References:
- intConnect vs ipmIntConnect vs devConnectInterrupt Bill Brown
- Navigate by Date:
- Prev:
address change for Phase Three Logic Chong Lee
- Next:
MPF and mpfSerial Marty Kraimer
- Index:
1994
1995
1996
1997
1998
1999
<2000>
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Re: intConnect vs ipmIntConnect vs devConnectInterrupt Andrew Johnson
- Next:
PowerPC Users: struct timespec problems Andrew Johnson
- Index:
1994
1995
1996
1997
1998
1999
<2000>
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
|