EPICS Controls Argonne National Laboratory

Experimental Physics and
Industrial Control System

1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024  Index 1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
<== Date ==> <== Thread ==>

Subject: RE: Kinetic Systems 2917/3922 CAMAC interface on PowerPC
From: Mark Rivers <[email protected]>
To: "'Mark Rivers '" <[email protected]>, "'[email protected] '" <[email protected]>, "'[email protected] '" <[email protected]>
Date: Sat, 5 Aug 2000 17:31:46 -0500
 Folks,

The problem with the Kinetic Systems 2917/3922 VME/CAMAC interface with the
MVME2700 (PowerPC) CPU turned out to be bus timing problems on the 2917
which prevented interrupts and DMA from working correctly.  Kinetic Systems
now has fixes for the problems, so if you are planning to use the 2917 with
the PPC you must have the board modified.

Cheers,
Mark Rivers


Navigate by Date:
Prev: Re: RFC: Graphical Database Editor Steve Lewis
Next: Sequencer question Mark Rivers
Index: 1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
Navigate by Thread:
Prev: Kinetic Systems 2917/3922 CAMAC interface on PowerPC Mark Rivers
Next: EPICS on a PC Dennis M. Reichhold
Index: 1994  1995  1996  1997  1998  1999  <20002001  2002  2003  2004  2005  2006  2007  2008  2009  2010  2011  2012  2013  2014  2015  2016  2017  2018  2019  2020  2021  2022  2023  2024 
ANJ, 10 Aug 2010 Valid HTML 4.01! · Home · News · About · Base · Modules · Extensions · Distributions · Download ·
· Search · EPICS V4 · IRMIS · Talk · Bugs · Documents · Links · Licensing ·