Dear all,
We have been working with EPICS using Solaris and VxWorks for the
last three years, and now we would like to test EPICS (CA client) in Linux.
The Linux version that we have is Red Hat Linux release 6.1 with
Kernel 2.2.12-20 running on a Pentium PC.
We start the caRepeater by hand (as suggested in the README.Linux file),
and it works, but when we run a Channel Access test program then it crashes.
After an elementary debugging process (consisting in adding some "printf"s
before an after a function call) we have seen that the error appears
when "ca_task_initialize" is called. In particular, a "Segmentation fault"
happens when the function "ca_os_indepen_init" just returns.
I understand that this is not much information but any hint on this
problem will be very welcome.
Thanks in advance for your help.
Josep
_____________________________________________________
Dr. Josep A. Perlas
Lab. Llum Sincrotro - IFAE ------------ Tel: (+34 93)581.28.38
Edifici Cn, Campus UAB ------------ Fax: (+34 93)581.32.13
E-08193 Bellaterra (Barcelona) SPAIN ---- email: [email protected]
_____________________________________________________
- Replies:
- Re: Problem with CA client in Linux D. Peter Siddons
- Navigate by Date:
- Prev:
Alarm for Analog Input Lars Ewell
- Next:
Re: Problem with CA client in Linux D. Peter Siddons
- Index:
1994
1995
1996
1997
1998
1999
<2000>
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
- Navigate by Thread:
- Prev:
Alarm for Analog Input Lars Ewell
- Next:
Re: Problem with CA client in Linux D. Peter Siddons
- Index:
1994
1995
1996
1997
1998
1999
<2000>
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
| 
·
Home
·
News
·
About
·
Base
·
Modules
·
Extensions
·
Distributions
·
Download
·